Cleaning Equipment
Bracton Beer Line Cleaning Equipment ensures your venue has the best tasting beer in town with minimal effort.
BEER LINE CLEANING SYSTEM – ON DEMAND MIXING
The Bracton Beer Line Cleaning System is the industry standard in safety and efficiency in beer line cleaning. When connected to water supply, the dispenser operates without electricity, using water pressure as the power source.
As water flows through, it activates the dispenser drawing the correct mixture of DP1 and DP2 cleaning solution accurate to 0.1% into the beer lines and towards the beer taps.
The system increases efficiency by mixing the correct amount of cleaning solution and reducing labour requirements. This enhances safety precautions by eliminating a staff contact point with chemicals and pressurised vessels.
- Zero wastage, machine only mixes what venue needs.
- No direct contact with hazardous chemicals.
- No pressurised hazardous chemicals.
- Save on labour – no setup time.
- Meets Safe Work Australia’s hierarchy of control guidelines.
WA4030 Beerline Cleaning / 2 Pumps/BARE/suit DP1/DP2
WA4050 Beerline Cleaning / 1 Pump/BARE/suit TWIN
WA4060BL Installation kit / B-lock
WA4060PV Installation kit / Pin Valve
WAD3RE2 D3RE2 Dosatron 0.2-3% dosing pump bare
BEER LINE CLEANING VESSEL - STAINLESS STEEL
Suitable for small venues, Stainless Steel Washout Kegs can be used to manually mix beerline cleaning chemicals into beer systems. Complete with safety valve the washout keg is available with quick release pin or B-Lock fittings. Bracton recommends using non-hazardous beerline cleaner in pressure vessels to reduce risks of injury from alkaline cleaners.
WA3000 Washout keg / SS 9 Lt / MF-AB+S Type
WO18BL Washout keg / SS 19 Lt / B-Lock
WO18PV Washout keg / SS 19 Lt / Pin Valve
WO18CV Washout keg / SS 19 Lt / Ball Lock
BEER LINE WASHOUT PUMP
WA4000 FLOJET G56 WASHOUT PUMP BOARD
KEG COUPLER WASHOUT MANIFOLDS
KE8090 Washout / Wallmount / MF-AB / 1x10mm Barb
KE8100 Washout / Wallmount / MF-AB / 2x10mm Barb
KE8040 Washout / Wallmount / D Type / 1x10mm Barb
KE8050 Washout / Wallmount / D Type / 2x10mm Barb
KE8020 Bypass cup / D-Type / Hand Held (CUB)
KE8030 Bypass cup / D-Type / Hand Held SS (CUB)
KE8060 Bypass cup / Plastic (Lion)
KE8070 Bypass cup / A-type / Hand Held SS (Lion)
WASHOUT MANIFOLDS AND TUBE
WO5100 Washout / Cross Trunk – 1/2″ SS (2 IN)
WO5200 Washout / Cross Trunk End – 1/2″ SS (1 IN)
WO5300 Washout Tube / SS 304G 1/2″ / 6 Metres
WO5400 Washout Tube / SS 304G 1/2″ / 3 Metres
WO5600 Washout / Crosshead Trunk Dual 3/4″ tube
SS 304G
WO5650 12.7mm nut and tail for 3/4″ washout IN
WO5700 3/4″ washout plug
WO5800 Washout Tube / SS 304G 3/4″ / 3 Metres
WATER PRESSURE REDUCTION VALVE
Protects beer system from operating outside of specifications.
WO5900 Water Pressure Reduction Valve
PRV / 3/4″ bspf / Caleffi
WO5950 Water Reg Gauge / Caleffi